2WCOM Satellite receiver DSR01 Basic

Highlights are: adjustable delay, suitable for SFN networks, double audio output and a web interface. The device is completely operable via the web interface. Optionally 2 audio-channels can be obtained from 1 stream. There are two stereo outputs available.

The DSR01 Digital Satellite Receiver guarantees audio and RDS data transmission in accordance with UECP standards. The integrated receiver decoder is equipped with DVB-S, which can be replaced with DVB-S2 and DVB-ASI if required. Latest codecs like AAC HEv1&2 are available, while monitoring and alerting of the receiver are implemented via IP/SNMP.

Transportstream inputs

• DVB-S 1-45 Msym/s
• DVB-S/S2 128 Ksym/s…45 Msym/s single and multiple channel per carrier
• ASI
• Gigabit IP

Redundancy/local commercials

• Optional: IP audio input combined with enhanced memory as additional backup solution

Audio output

• Balanced analogue and digital AES/EBU (switchable 15KHz low-pass)

Data output (e.g. RDS, DRM)

• Serial, IP and X.21 interface
• or 2 additional RS232 outputs

Decoding

• Audio decoding (professional MPEG decoder: MPEG 1/2 Layer 1, 2, 3 (optional: MPEG 2/4 AAC LC, HEv1&v2 and AC3)
• RDS decoding (built in RDS/UECP decoder)

Control

• Via webinterface
• Via satellite carrier (e.g. relay switching)
• SNMP v2c

Monitoring

• RF and MPEG parameters via SNMP v2c and relay
• Monitoring of up to eight audio programs via IP

The standard (basic) version includes: DVB-Stuner (1-45 Msym/s), 15 kHz low passfilter, adjustable audio delay, 2 serial outputs for RDS, audio interface analogue and AES/EBU, TCP/IP and web interface, SNMPv2c, RDS/UECP monitor, headphone output, display/jogwheel

Below you can find a list of the available options: