D&R Airlab - Triple input module EQ (mic/stereo/stereo) VCA

As the name suggests, the AIRLAB triple input module combines a mic input with two stereo line inputs.

The mic input is electronically balanced with the industry standard SSM 2017 low noise mic pre-amp.

A 48 volt phantom power switch is provided for. Apart from the gain control we have built in a front panel accessible trimmer to determine the mic gain range.

A low cut filter can be activated by a jumper on the PCB. The mic input is located at the back of the console on female XLR connectors.

The unbalanced stereo line B input, accessible on Cinch connectors, can be fitted with an RIAA plug-in PCB to accept phono players.

The Line A input is balanced and on XLR’s.

The fixed, to +/- 12dB limited three band equalizer is followed by a SUB and PROGRAM assign switch that routes signals to both outputs allowing production work to be carried out during broadcast.

The stereo Aux. control can be selected pre or post VCA/MUTE, depending on jumpers.

The stereo Aux. send is followed by a Pan control, a Cue/select switch and the channel On switch disabling 

Cue, although it can be reactivated while the channel is on.

It is also possible to activate Cue via the channel remote connector.

Cue becomes a Cough facility when the Mic input and the "On-AIR" status is selected.

The AIRLAB is equipped with linear 100mm faders controlling high quality "THAT" VCA's, another high end industry standard.

Start can be activated with the fader or ON switch, depending which is activated first.

Start can be software configured so that switching is from line A or line B. Similarly, the Cue switch is under software control avoiding impossible settings.

Broadcast Partners can configure a complete Airlab console with the exact modules you need at an attractive price. Please contact us for a special offer.