The BS2 Power Splitter is normally sold in combination with our BS2 antenna system consisting of two tuned dipole antennas. This power splitter is also tuned on the needed frequency for higher efficiency compared with a broadband power splitter.

The BS4 Power Splitter is normally sold in combination with our BS4 antenna system consisting of four tuned dipole antennas. This power splitter is also tuned on the needed frequency for higher efficiency compared with a broadband power splitter.

Power splitter is the main accessory used to built radiating antenna systems arrays. They are manufactured in several models with all the combinations between frequency bands, number of out and input and connector types.

Power splitter is the main accessory used to built radiating antenna systems arrays. They are manufactured in several models with all the combinations between frequency bands, number of out and input and connector types.

Most antenna systems consist of two or more antennas. A power splitter divides the power coming from the transmitter system over these antennas in the antenna system. This power splitter has a N-female connector input and four outputs with N-female connector and can handle 800 W maximum input power.

Most antenna systems consist of two or more antennas. A power splitter divides the power coming from the transmitter system over these antennas in the antenna system. This power splitter has a DIN 7/16" female connector input and two outputs with N-female connector and can handle 1,6 kW maximum input power.

Most antenna systems consist of two or more antennas. A power splitter divides the power coming from the transmitter system over these antennas in the antenna system. This power splitter has a DIN 7/16" female connector input and three outputs with N-female connector and can handle 2,4 kW maximum input power.

Power splitter is the main accessory used to built radiating antenna systems arrays. They are manufactured in several models with all the combinations between frequency bands, number of out and input and connector types.

Most antenna systems consist of two ore more antennas. A power splitter divides the power coming from the transmitter system over these antennas in the antenna system. This power splitter has a DIN 7/16" female connector input and two outputs with DIN 7/16" female connector and can handle 3 kW maximum input power.

Most antenna systems consist of two or more antennas. A power splitter divides the power coming from the transmitter system over these antennas in the antenna system. This power splitter has a DIN 7/16" female connector input and four outputs with DIN 7/16" female connector and can handle 3 kW maximum input power.

Most antenna systems consist of two or more antennas. A power splitter divides the power coming from the transmitter system over these antennas in the antenna system. This power splitter has a EIA 7/8" flange input and two outputs with N-female connector and can handle 3 kW maximum input power.

Power splitter is the main accessory used to built radiating antenna systems arrays. They are manufactured in several models with all the combinations between frequency bands, number of out and input and connector types.

Most antenna systems consist of two or more antennas. A power splitter divides the power coming from the transmitter system over these antennas in the antenna system. This power splitter has a EIA 7/8" flange input and two outputs with DIN 7/16" female connector and can handle 3 kW maximum input power.

Most antenna systems consist of two or more antennas. A power splitter divides the power coming from the transmitter system over these antennas in the antenna system. This power splitter has a EIA 7/8" flange input and four outputs with DIN 7/16" female connector and can handle 3 kW maximum input power.

Most antenna systems consist of two or more antennas. A power splitter divides the power coming from the transmitter system over these antennas in the antenna system. This power splitter has a EIA 7/8" flange input and two outputs with EIA 7/8" flange and can handle 5 kW maximum input power.

Most antenna systems consist of two or more antennas. A power splitter divides the power coming from the transmitter system over these antennas in the antenna system. This power splitter has a EIA 7/8" flange input and four EIA 7/8" flange outputs and can handle 5 kW maximum input power.

Bracket to mount a power splitter (versions with N, 7/16", 7/8") on a pole with diameter between 30 and 60 mm. You normally need two brackets for each power splitter.

Bracket to mount a power splitter (versions with 7/8" - 1-5/8") on a pole with diameter between 40 and 120 mm. You normally need two brackets for each power splitter.