The DB3000 FM Modulation Analyzer is a digital FM demodulator and modulation analyzer. The RF (IF) and MPX signal is digitalized as soon as it enters the device, and all signal processing is then made through calculations. Digitizing in this way, at the input gives the equipment measurement reproducibility over time. Digital filters’ accuracy, used in this equipment, enables the FM multiplex signal’s components to be accurately and repeatedly reproduced from one device to another, i.e. same signal applied to two devices will give the same result.

DB4000 is a cost effective unit for permanent monitoring of the quality and continuity of up to 50 FM Radio Stations with innovative features such as TCP/IP connectivity, audio streaming and automatic alerts on out of predefined ranges in regards with the ITU-R. In case of any faults in the transmission the maintenance staff will be immediately alerted via E-mail or SMS which allows to the technicians to restore a normal service as soon as possible. This tool enhances the radio stations' quality control management.

The best device to fight the dreaded dead air problem is the DB8000 from Deva Broadcast. It is designed and built to be simple, flexible, reliable and easy for integration with the existing setups of any single station to a large radio networks. The basic principle of DB8000 is that this unit can detect the silence and start playback of a preliminary created play list on the built-in MP3 player.

This is a tool to evaluate FM broadcast band congestion and to log station identification parameters.

The TS9080, FM Modulation and AF Spectrum Analyser, has been designed for precision monitoring of FM Radio Broadcasts. Connected to a standard Windows PC, via a USB port, it’s user friendly interface displays all modulation data on screen for analysis.

This unit has been developed to monitor FM transmitters / FM Networks. All the essential parameters are available in the web browser. The unit decodes RDS and can stream the received audio over IP (option). Please take a look at the attached .pdf brochure for more information

This product is similar to the A20FM, but without display. It is suited to scan / monitor 1 FM station. The frequency of the unit can be changed via IP.

With the 2Wcom FlexMon FM01 TMC/RT+ broadcasters are now able to monitor their transmitted RDS data effectively around the clock. The FlexMon enables the monitoring of all RDS data (TMC, RT+, RT, PI, PS, CT, TA, TP). The operator also has the option to choose individual RDS group data. In case of failure of certain RDS groups an alarm will be generated via SNMP or relay. The FlexMon is particularly suited for operators with main focus to monitor TMC data
 

The T980A is a high performance FM Broadcast Monitor and RDS decoder, with advanced control software, utilizing the RS232 serial port. A continuous stream of RDS, RSSI, signal deviation, pilot, RDS subcarrier, multipath and tuning data, is sent back to the PC. The data can be instantly copied to the clipboard, from where it can be pasted to any application.

Software for recording and playback of RDS data in connection with the A20 FM Monitoring Decoder

The 2Wcom RDS Logger software is adapted for extensive documentation purposes. It consists of three components: LogService, LogPlayer and LogControl. All RDS group data are recorded (LogService) and written into log files (LogService) on any local or network drive. These files can even be played back afterwards (LogPlayer) to be able to reproduce a failure and forward it again to our RDS Encoder in a transparent mode. The service can be controlled with the LogControl Software. The RDS Logger software is particularly useful if performed (pay-)services like TMC have to be verified.