Neumann KMS 105 D bk Stage microphone - Digital

Specifications KMS 104 D / KMS 105 D
Acoustic transducer: Pressure gradient transducer
Directional characteristic: Cardioid/Supercardioid

Frequency response: 60 Hz to 20 kHz
Free-field sensitivity1):–47 dBFS
Equivalent noise level, CCIR3): 27 dB
Equivalent noise level, A-weighted3): 16 dB-A
Signal-to-noise ratio2), CCIR3): 67 dB
Signal-to-noise ratio2), A-weighted3): 78 dB
Maximum SPL at 0 dBFS: 141 dBSPL
Dynamic range, A-weighted4): 125 dB

Preset:
- Sampling rates: 48 kHz
- Gain: 10 dB (variable with DMI-2)
- Compressor on, Attack time 100 ms, Release time 0.5 s,
Threshold –10 dBFS, Ratio 2:1

Supply voltage range: +6 V to +10.5 V
Current consumption: max. 150 mA
Weight: approx. 300 g, Diameter: 48 mm, Length: 180 mm
General Specifications of the Solution-D microphones
Interface: AES42

Remote controlled functions:
- Polar pattern4)
- Low-cut: flat, 40, 80, 160 Hz
- Pre-attenuation: 0 , -6, -12, -18 dB
- Gain: 0...63 dB in 1 dB steps, clickless
- Testsignal: 1 kHz, pink noise, white noise
- Parametric compressor/limiter (incl. de-esser function)
- Independent peak limiter avoiding any clipping
- Switch functions: soft muting, phase reverse, signal lights
- Signal lights: red4) and blue LEDs
- System functions, firmware download

A/D conversion: Neumann process (patented),
28-bit internal word length

Digital signal processing: Fixed-point,
variable internal word length 28 bits to 60 bits

Synchronization:
- Asynchronous operation (free-running, AES42 - Mode 1),
basic frequency accuracy: ± 25 ppm
- Synchronous operation (AES42 - Mode 2),
pulling range: Min. ± 100 ppm

Power supply (phantom power complying with AES42)

Output: XLR3M, 24 bits as per AES/EBU (AES3)
________________________
All data with respekt to 0 dB pre-attenuation and 0 dB gain.
1) at 1 kHz
2) re 94 dBSPL
3) according to IEC 60268-1;
CCIR-weighting according to CCIR 468-3, quasi peak;
A-weighting according to IEC 61672-1, RMS
4) D-01 only