Audio over IP decoder with built-in 2x25W amplifier, S/PDIF output, USB flash interface and IR receiver, multi-format (MP3/WMA/AACplusV2, PCM,Ethersound) support. The Exstreamer 200 IP Audio Decoder decodes and plays multi-protocol and multi format audio streams, including MP3, AACplusV2, WMA, PCM, G.711, Ethersound. The integrated stereo amplified delivers 2 x 25 watt audio into 8-ohm speakers. In addition, an S/PDIF digital output and headphone jack are available.

Professional standards-based desktop IP Intercom and paging master station for use in IP Audio distribution applications. The Barix Annuncicom PS1 is a PoE multifunction, standalone IP intercom and IP PA master station, suitable for high quality IP Intercom and paging applications without the need for PCs or server software.  

Universal, Multiformat IP Audio Decoder with Amplifier, PoE powered. The Exstreamer P5 provides amplified audio (5W RMS) directly into an 8 Ohm speaker. Ethersound (ES-100/Spkr) support enables the devices to be used as a single channel receiver/decoder in realtime audio distribution applications which target ultra low latency for live audio. A serial and IR port (on an RJ-45 connector) allows direct connection of the Barix VSC or similar in-room controls. The device draws its power from an 802.3af Ethernet connection.

The Barix Instreamer 100 is a versatile, network-enabled analog and digital audio-to-Ethernet converter for commercial audio distribution. Barix Instreamer 100 converts audio from any analog or digital device into high-quality MP3 streams.The audio is encoded in real-time, and the generated audio stream can be distributed, via an IP-based network or the Internet, to one or more receivers or Shoutcast/Icecast-servers. Very often sold as set with the Barix Exstreamer 100

The Barix Extreamer 100 Streaming Client is a device designed for simple home and instore audio playing. It's capable of playing MP3 and WMA using various protocols. Very affordable and often sold together with the Barix Instreamer 100 for cost effective point to point audio links over internet.

Audio over IP decoder with line-level audio outputs and USB flash memory interface, low power, multi-format (MP3/WMA/AACplusV2,PCM, Ethersound) support. The Exstreamer 100 | 105 IP Audio Decoder decodes and plays multi-protocol and multi-format audio streams, including MP3, AACplusV2, WMA, PCM, G.711, and Ethersound. It features a stereo line level output, headphone connection, and low power consumption. The Exstreamer 100 | 105 is a reliable IP-enabled audio streaming device which can be used in a variety of audio over IP applications such as local and internet-based IP music distribution systems, in-store audio applications, paging and announcement systems.  

The Barix Exstreamer 110 enables robust, low cost, low power audio distribution systems to be built using LAN, WAN or the Internet: PC Free. The device can be controlled using the included remote control, by web browser through it’s built-in web UI, or by Ethernet APIs. The Exstreamer 110 can play AAC+, MP3, Ogg Vorbis, WMA, G.711 and PCM audio files and streams. For high quality point to point links we can also recommend the combination with the Orban Optimod-PC 1211 acting as the AAC streamer/encoder and the Barix Exstreamer 110 as the AAC decoder.

The Exstreamer 120 has an additional slot for a Micro-SD flash card instead of a USB memory stick. Besides this extra feature this Barix Exstreamer 120 is equal to the Exstreamer 110.

The Barix Exstreamer 200 is a versatile network audio decoder for multi-room distributed audio system. It enables users to create flexible, cost-effective distributed audio systems using standard IP technology. The Barix Exstreamer 200 plays MP3 (soon also G.711 & PCM) audio files from PC or web server (http) as well as legacy digital and analog sources (using the Barix Instreamer) and streams from sources like Shoutcast, Icecast (Internet radio) or RTP servers (Instreamer).The integrated 2 x 25 Watt amplifier delivers audio directly to speakers. Also has a spdif digital interface.

The Barix exstreamer 500 can be used not only as exstreamer, but also as instreamer. It is a new all in one solution, Barix specifically for the professional broadcast market has developed.  

The Barix Exstreamer 1000 is a versatile network device that can function either as an audio encoder or decoder for a variety of high quality audio applications. The Barix Exstreamer 1000 features AES/EBU in and out to provide a fully digital transmission path. The Exstreamer 1000 is part of a whole range of devices from Barix geared towards professional IP Audio solutions. Four supervised contact closure inputs, four relay outputs, two serial interfaces (RS-232 and RS-485), AES/EBU and professional grade, balanced audio inputs and outputs and 24/48V capable power input give the device maximum flexibility for use in professional, high quality applications.

 The Barix Annuncicom is a network intercom and PA component that bridges audio to Ethernet to allow people to communicate with each other and to distribute announcements.

Versatile, standards-based IP Intercom and PA device with contact closure inputs and relay ouput, power over Ethernet (PoE) support, and an 8-watt speaker amplifier. The Barix Annuncicom 200 is a versatile IP Intercom and PA device with PoE support, capable of full duplex (bi-directional) streaming of uncompressed audio formats, such as PCM, u-law, or a-law, or half-duplex encoding or decoding of MP3 streams. With its two contact closure inputs and built-in relay, it provides the necessary I/O for push to call and door opener functionality. A built-in 8-watt speaker output and microphone amplifier allow the direct connection of a microphone and speaker. An Aiphone door station interface allows the use of third-party intercom panels. Line level input and outputs are also available. An isolated 48V supply input for telco/transportation applications is also provided  

Versatile, standards-based, professional IP Intercom and PA device with supervised contact closure inputs and relays, balanced audio interfaces and redundant supervised Ethernet and power connections. The Barix Annuncicom 1000 is a versatile, professional IP Intercom and PA device with eight supervised contact closure inputs, nine relay outputs and balanced stereo audio interfaces, including support for professional microphones on the audio inputs. Dual redundant supervised power supply inputs and redundant network interfaces make the Annuncicom 1000 ideal for very high reliability applications.  

Includes Phone Audio, Cat5 Patch, 9 Pin RS-232 Cables & Earbuds

This cable set is designed for the use with Exstreamer 1000  

Barix accessory for Ex-/Instreamer devices, which can be used to secure the devices within their operating environment.

Accessory to mount Barix audio devices in a standard 19" rack.

IR reception dongle connects to Barix Exstreamer devices via the built-in serial port.   

Programmable I/O device server with two serial ports, Dallas 1-wire support, SNMP, Modbus/ TCP and web interfaces via built-in 10/100 Ethernet port. The Barionet is a fully programmable I/O device server that supports standard interfaces such as SNMP, CGI, HTTP, and Modbus/TCP to access local I/O and program functions.

Programmable I/O device server with 2 serial ports, 8 digital I/O and Dallas 1-wire support, SNMP, Modbus/TCP and web interfaces via builtin 10/100 Ethernet interface. The Barionet 50 is a fully programmable I/O device server that supports standard interfaces such as SNMP, CGI, HTTP, and Modbus/TCP to monitor and control a variety of built-in I/O functions. Four contact closure inputs, four relay outputs, a 1-wire interface and two serial ports can be monitored and controlled via several built-in protocols. In additoin, all I/O functions and interfaces can be controlled and monitored using custom DHTML web pages and BCL (Barix Control Language) applications loaded into the device.  

Modbus remote I/O module with RS485 Modbus/ RTU interface, 12 current sourcing outputs and 12 optically-isolated inputs. The Barix IO12 is a Modbus digital I/O module with a standard RS-485 Modbus/RTU interface. It provides 12 current sourcing outputs and 12 optically- isolated inputs that can be addressed using standard Modbus/RTU commands. The IO12 can be used as a general-purpose Modbus I/O device or it can be interfaced to the Barionet using the Barionet’s built-in RS-485 interface and BCL code to implement the Modbus/RTU message protocol.  

Modbus remote I/O module with RS485 Modbus/ RTU interface, 8 universal (analog or digital) TTL level inputs or outputs. Suitable also as a Wiegand converter or 1-wire temperature sensor interface to Modbus/RTU. The Barix X8 is a universal Modbus I/O module with serial RS-485 Modbus/RTU interface. Eight universal inputs or outputs can be independently programmed to act as digital or analog inputs with a programmable pull-up resistor, or as digital outputs. The X8 can be used to interface to I/O, wiegand enabled readers/keypads or Dallas 1-wire temperature sensors. It can be used as a general-purpose Modbus I/O module or it can be interfaced to the Barionet using the Barionet’s built-in RS-485 interface and BCL code to implement the Modbus/RTU message protocol.  

Modbus remote I/O module with serial RS-485 Modbus/RTU interface, and 6 high current relays (230VAC,16A), UL listed, DIN Rail mountable The Barix R6 is a UL-listed Modbus I/O module with a serial RS-485 Modbus/RTU interface. Six high-current relays, capable of switching up to 16 amps at 230VAC allow switching of line voltage devices. The R6 can be used as a general-purpose Modbus I/O module or it can be interfaced to the Barionet using the Barionet’s built-in RS-485 interface and BCL code to implement the Modbus/ RTU message protocol  

This Application permits to test if an attached 1-wire RTC (Real Time Clock) can be read correctly. If the RTC is not set the application will try to set it.

Evaluation kit for the Barix IP Audio Module IPAM 100, with evaluation printed circuit board, including serial, Ethernet, USB connectors and interfaces and pin headers for IPAM 100 Audio and I/O interfaces The Barix IPAM 100 Audio Module Evaluation Kit is designed to make prototyping and evaluation of the IPAM 100 easier.  

Versatile, standards-based IP Intercom and PA device with contact closure inputs and relay ouput, power over Ethernet (PoE) support, and an 8-watt speaker amplifier.

Ongebouwde1-Wire temperatuursensor voor domotica, industriële toepassingen en de controle  

Mounting Bracket for Barix

Volume Control System VSC, 2008.8056

Adapter for VSC

The Barix Paging Station PS16 is a universal, TCP/IP connected intercom station for use in IP Intercom, Paging and VoIP applications. The PS16 directly connects to the network via a 10/100Mbps network connection, and can also be powered over the network interface (PoE, 802.3af standard). For high availability applications, a second network connection and separate power input are available.  

48 buttons Extension for the Barix Paging Station PS16.  

The Barix IP audio module (measuring only 1.5" x 2.5") carries the full capabilities of all Barix audio products including dual Ethernet suitable for bridging, a USB interface and dual serial ports, among additional features. This module can be loaded with standard Annuncicom, Instreamer, Exstreamer or OEM firmware. The IP Audio Module is a typical OEM product which allows customers to easily integrate IP audio streaming and IP-based control into their devices while eliminating long development cycles.  

Advanced multiformat IP Audio decoder module for OEM applications with USB, various I/O capabilities and a serial port. The IPAM 300 is an IP Audio module with multiformat decoding capability, programmable digital inputs and outputs, and multiple serial interfaces. It is ideal for adding IP based streaming and control functions to OEM products. The IPAM 300 runs Barix standard firmware and can also be custom programmed using the built-in ABCL (Audio Barix Control Language, which is very similar to BASIC).  

Barix connection cable set