HF Prints RLT10GHz Radio Link standard TX/RX-set Mono/MPX incl. 2x ant

Fixed connections are required to transmit the signal from the studio to the transmitters.

These connections are operational 24/7. A part of the 10 GHz band is specially reserved for these connections, allowing a large distance to be overlapped. H.F.Prints is a supplier of 10 GHz connections, that can be customized to the client's demands. These connections require a permit from the Agentschap Telecom.

Standard TX/RX-set Mono/MPX includes 2 antennas

The "standard" connection consists of a transmitter, equipped with a single audio input (mono or MPX), a LEDbar to measure the modulation level, an overdrive indicator, a modulator and the necessary power supplies (also for the external unit).

The rear-side is equipped with an XLR connector for the audio input. The HF signal output is an N-connector.

Both the power supply for the antenna signal (active multiplier)and the 230V power connector are protected by fused. Both the fuses are placed on the rear-side.

Optional expansions like stereo coder, stable time basis etc. are also available. The receiver has two audio outputs, allowing the MPX output to be connected directly to the broadcasting transmitter. The mono output can also be used as a headphone output. The receiver also incorporates field strenght measurement, an sensitive yet large scale receiver, AFC and all the required power connections.